First shown on our Instagram page some months ago we are ready to unveil our brand new two pin plug. This awesome new design makes the previously dull world of plugs and sockets a guaranteed 100% more exciting!
Our new foil and sabre two pin bodywire is
- Longer lasting - the best strain relief on the market
- Less Exploding - no more flying lock clips
- Easier to fix - no need for a helpful octopus
- Prettier - like it was hewn from a solid block of ice (or a glacier mint)
Read on for a full description of all its the benefits!
So, let us tell you more....
The longest lasting two pin in the world. This unique design combines a solid poly-carbonate plug with a soft flexible wire strain relief. Wires nearly always break where the wire exits the hard part of the plug. The repeated bending at this point breaks the wire and the heat shrink that is used in all other designs does a little but not much to provide protection. Our flex guard protection allows the wire to free float and eradicates the sharp bend point. The result is a wire that lasts up to 5 times longer.
Permanently riveted lock. One of the most common complaints with other wires is that the locking mechanism comes undone and flies off. This leaves you scrabbling around on the floor to find a tiny screw, spring and nut that have pinged across the piste. Our new lock is permanently riveted into the plug meaning you have one less thing to worry about.
Easier to fix...
One screw is better than two. The single screw goes into a nut that is captured inside the plastic shell meaning there are less parts to loose and it is so fast to put together you can almost do it with one hand.
Gorgeously see through, it reminds us of a greenland glacier. The clear plug, strain relief and wire make are not only lovely to look at but easy to maintain as you can quickly see any problems.
...simply the best!
Of course, our updated two pin bodywire is FIE-approved and compatible with all of your existing two pin sockets. It also features all the benefits of our other bodywires:
We make our wire from double spun multi core copper cable coated in silver, each core being made of hundreds of twisted copper filaments. This gives the wire greater flexibility and increases its lifespan. We coat the wire with clear plastic so that if it does eventually break you can see where it has broken and just trim it rather than replace the whole item.
The covers on the three pin end are made from a one-piece flexible plastic moulding. This allows the wire to flex inside the plug and prevents it from being bent repeatedly at the point of entry, which increases the lifespan of the wire.
All in all a few neat tweaks make a much better product and we are confident this is the best two pin bodywire in the world!
"Leon Paul often imitated; never bettered" ;)
Oh, and by the way: For those of you interested in getting the inside track on what we are doing here in the Leon Paul factory subscribe to our Instagram page, where we regularly post sneak previews of our upcoming products.