Applicator, foil point wire  Ref: TA2

Formed plastic rod for pushing the brass contact of a foil wire into the barrel of the point when rewiring.

On-line Price:    £1.14 Without tax.   £1.34 Including VAT at 17.5%

Applicator, épée point wire  Ref: TA4

Formed plastic rod for pushing the brass contacts of an epee wire into the barrel of the point when rewiring.

On-line Price:    £1.14 Without tax.   £1.34 Including VAT at 17.5%

Applicator, épée blade rewire jig (bag of 5)  Ref: TA6

For holding the wire in leon paul syle epee blades when re-wiring. These clip on the blade near the forte

On-line Price:    £1.40 Without tax.   £1.65 Including VAT at 17.5%

Cleaning liquid (for all point parts)  Ref: TC2

Removes dust and grit from point parts without causing corrosion. Please note this is a flamable aerosol product and therefore can not be sent to any destination outside the UK.

On-line Price:    £6.73 Without tax.   £7.91 Including VAT at 17.5%

Cleaning corrosion block (for guards and blades)  Ref: TC4

Removes rust and dirt from blades and guards to prevent them marking clothing and keep them looking brand new.

On-line Price:    £6.17 Without tax.   £7.25 Including VAT at 17.5%

Die high speed M 3.5 x M 0.6 foil point (3.5mm metric thread)  Ref: TD4

Die for cutting or re cutting foil tip threads. This product is for use in conjunction with with the die holder reference TD10 below or another similar die holder.

On-line Price:    £27.06 Without tax.   £31.80 Including VAT at 17.5%

Die high speed M 4 x M 0.7 épée (4.0mm metric thread)  Ref: TD6

Die for cutting or re cutting epee tip threads. This product is for use in conjunction with with the die holder reference TD10 below or another similar die holder.

On-line Price:    £24.44 Without tax.   £28.72 Including VAT at 17.5%

Die M 6 for all blade tangs (6.0mm metric thread)  Ref: TD8

Die for cutting or re cutting tang threads for all three weapons. This product is for use in conjunction with with the die holder reference TD10 below or another similar die holder.

On-line Price:    £6.91 Without tax.   £8.12 Including VAT at 17.5%

Die holder 13/16" o/d.  Ref: TD10

Suitable die holder for TD4, TD6 and TD8 dies.

On-line Price:    £11.81 Without tax.   £13.88 Including VAT at 17.5%

Feeler gauge (to test point travel and sabre blade tip size)  Ref: TF2

This multi purpose feeler guage has a slot for checking epee travel and the size of sabre blades.

On-line Price:    £5.63 Without tax.   £6.62 Including VAT at 17.5%

Two part blade resin Glue  Ref: TG2

Recomended for use by armourers or people rewiring lots of blades at once. This is the same high quality resin glue that we use for wiring all of our blades. It comes in two bottles and is mixed in a 1:1 ratio. The resin takes around 20 minutes to become touch dry and 8 hours to fully harden. Once dry it is extremely tough while being flexible which means that it lasts much better than

On-line Price:    £9.94 Without tax.   £11.68 Including VAT at 17.5%

Glue instant blademate  Ref: TG4

Fast drying re wiring glue for up to 15 blades. Doubles up as a cheap alternative to super glue for all general home use!

On-line Price:    £3.88 Without tax.   £4.56 Including VAT at 17.5%

Allan key for budget blade sleeve  Ref: TK4

Allan key for attaching the sleeve of a budget maraging blade.

On-line Price:    £0.34 Without tax.   £0.40 Including VAT at 17.5%

Allan key for crosse nut  Ref: TK2

6mm Allan key for all Leon Paul pistol grip crosse nuts.

On-line Price:    £1.80 Without tax.   £2.12 Including VAT at 17.5%

Plastic Blade Sleeving for Foil and Sabre  Ref: TS18FS

Wide enough for two Foil or two Sabre blades.

On-line Price:    £0.89 Without tax.   £1.05 Including VAT at 17.5%

Plastic Blade sleeving For Epee.  Ref: TS18E

Wide enough for one Epee Blade.

On-line Price:    £0.89 Without tax.   £1.05 Including VAT at 17.5%

Screwdriver (point)  Ref: TS2

Watchmakers hardened steel screwdriver for use with all manufacturers grub screws.

On-line Price:    £2.78 Without tax.   £3.27 Including VAT at 17.5%

Wide blade Screwdriver  Ref: TS3

Screwdriver with wide blade for Epee Inside Guard Sockets.

On-line Price:    £4.51 Without tax.   £5.30 Including VAT at 17.5%

Sleeving blade tang pvc 10mm diam. per metre  Ref: TS4

Tubing for protecting the wires of electric blades when they are being stored un mounted.

On-line Price:    £1.30 Without tax.   £1.53 Including VAT at 17.5%

Sleeving blade wire PVC 1mm diam. per 10 metres  Ref: TS6

Thin red PVC tubing for insulating foil and epee wires between forte and inside guard socket.

On-line Price:    £1.30 Without tax.   £1.53 Including VAT at 17.5%

Spanner 5 mm. (for G.T. foil bases)  Ref: TS8

Spanner for removing or tightening foil barrels / bases.

On-line Price:    £5.90 Without tax.   £6.93 Including VAT at 17.5%

Spanner 6 mm. (for G.T. épée bases)  Ref: TS10

Spanner for removing or tightening epee barrels or bases.

On-line Price:    £5.90 Without tax.   £6.93 Including VAT at 17.5%

Spanner with tommy bar (for handle No.140)  Ref: TS12

Long shanked tommy bar for the 6 mm nuts used in our ultra light carbon fibre handles. This spanner allows you to easily attach the handle using a small nut to a standard cut down crosse tang.
If you have the weapon in a vice with the tang pointing upwards a handy tip is to use a small piece of sellotape to hold the nut in the spanner. This sellotape will prevent it from falling out when you turn the spanner upside down in order to insert it into the handle.

On-line Price:    £5.24 Without tax.   £6.16 Including VAT at 17.5%

Tape foil blade cloth (15mm x 50 metres)  Ref: TT2

Foil cloth tape for insulating and protecting the tip end of the blade.

On-line Price:    £10.07 Without tax.   £11.83 Including VAT at 17.5%

Tape foil blade cloth (small roll 15mm x 20 metres)  Ref: TT3

Foil cloth tape for insulating and protecting the tip end of the blade.

On-line Price:    £4.21 Without tax.   £4.95 Including VAT at 17.5%

Tape foil blade pvc (9mm x 20 metres)  Ref: TT4

Point tape for insulating and protecting the point and grub screws.

On-line Price:    £5.43 Without tax.   £6.38 Including VAT at 17.5%

Test box for weapons (batteries not included)  Ref: TT6

This is a basic test box for checking the functionality of foil and epee points. It checks for the correct resistance, electrical shorts and correct tip function. In conjunction with a test weight it can also be used to check the spring is the correct pressure. You will need a bodywire to use this test box. Runs on two standard AA batteries (not included).

On-line Price:    £13.77 Without tax.   £16.18 Including VAT at 17.5%

Test box with buzzer (batteries not included)  Ref: TT8

The features for this box atre the same as for the TT6 above however it also contains a buzzer for added convenience. The buzzer is particurlaly usefull for checking multiple weapons and for working without looking at the box. Runs on two AA batteries (not included).

On-line Price:    £20.45 Without tax.   £24.03 Including VAT at 17.5%

Test box with fault locking LED  Ref: TT9

This box has similar functionality to the TT6 however, it has a seperate pair of LED's thatwhen a fault is detected lock in the on position. You will need a bodywire to use this test box.

On-line Price:    £22.71 Without tax.   £26.68 Including VAT at 17.5%

Test box for weapons and bodywires (batteries not included)  Ref: TT10

This is a more advanced test box with the ability to check both points and body wires. Runs on two AA batteries (not included).

For a printable pdf instruction sheet about this product please click

here.

On-line Price:    £30.91 Without tax.   £36.32 Including VAT at 17.5%

Test box batteries to fit TT 6 / 8 /10 (Pair)  Ref: TT12

Standard AA batteries for test boxes sold as a pair.

On-line Price:    £0.91 Without tax.   £1.07 Including VAT at 17.5%

Weapon control board  Ref: TW2

Armourers weapon control board for checking flexibility, size guard size etc... Please note this is a special order item and will take approximately 28 days to ship. For more details on this product please call +44 (0) 20 7388 8132.

On-line Price:    £1,114.30 Without tax.   £1,309.30 Including VAT at 17.5%

Weight for testing foils 500 grams  Ref: TW4

Weight for testing foil points.

On-line Price:    £11.23 Without tax.   £13.20 Including VAT at 17.5%

Weight for testing épées 750 grams  Ref: TW6

Weight for testing epee points.

On-line Price:    £13.27 Without tax.   £15.59 Including VAT at 17.5%

Weight combination for testing foils and épées  Ref: TW8

Combi weight for testing both foil and epee points.

On-line Price:    £19.47 Without tax.   £22.88 Including VAT at 17.5%

Weight for testing lame jacket 500 grams  Ref: TW10

Weight for testing lame resistance. This is a test probe for measuring the conductivity of lame jackets when connected to an ohmmeter. To test the jacket you place one probe of the ohmmeter on the lame and then attach the weight to the other side probe of the ohmmeter. You then rest the probe on the lame and move it around to check that the resistance conforms to regulations.

On-line Price:    £18.22 Without tax.   £21.41 Including VAT at 17.5%

Mask front angle test gauge  Ref: TM4

Masks must have an angle of less than 130 degrees. Masks that have a flatter profile on the front are dangerous as blades can catch on the front of the mask mesh instead of being deflected to the sides. This is a handy device for measuring the front angle to ensure the mask is legal.

On-line Price:    £4.44 Without tax.   £5.22 Including VAT at 17.5%