Our best selling pistol grip. This solid Aluminium handle is the only one on the market our Gryptonite crinkle coating for maximum grip. The price includes the nut ref: 92sml that is used to attach the handle.

Size	XS	S	M	L	XL
Weight	68g	79g	92g	118g	133g

This handle is based on the actual handles that Sergei Golubitsky used for 10 years; using them he won an amazing 3 World Championships. The design is smaller than most and Sergei feels that the compact shape gives him greater control. His original handles were adapted Belgian handles and we have faithfully copied his design. On the lower protrusion he had built up the handle extensively with tape and this helped to grip the little and ring fingers tight into the handle against the protrusion that sits between the ring finger and middle finger. We have replaced the tape witha asymmetric piece of rubber tube. This has a slightly triangular cross section that means the wall thickness of the tube varies. This tube can be rotated as necessary to create a shape comfortable for the individual. The part of the handle that buts up against the guard is ground to butt perfectly up against the guard when the blade is given a normal set. The price includes the nut ref: 92sml that is used to attach the handle.

Weight:

119g

One size solid Aluminium Grip with Gryptonite crinkle coating for maximum grip. The price includes the nut ref: 92sml that is used to attach the handle.

Weight:

98g

These are best suited for medium to small sized hands (less than a glove size 8.5 or 9). They have a pad for the palm rather than the usual slim extention. They are extremely comfortable in the right sized hands. The price includes the nut ref: 92sml that is used to attach the handle.

Weight:

100g

This is an injection moulded plastic crosse handle designed to fit on blades with a crosse (short) tang. The handle is both lightweight and virtually indestructible making it ideal for all levels of fencing. The price includes the nut ref: 92 that is used to attach the handle.

Weight:

46g

The Gardere handle is a cross between the pistol and french grip. It fits on a full length tang with a pommel but is formed to provide extra grip. The price includes the pommel ref: F74 that is used to attach the handle.

Weight:

49g

These traditional French grips have a curved shape to follow the contours of the hand for a perfect fit. The leather is bonded to the core with tough flexible resin glue that will last for years. The surface of the grip is treated with a "tackifying" solution which makes it extremely grippy and the absorbent surface of the leather means that it retains its grip even when damp from perspiration. The handle is finished with a friction fit aluminium feral at each end that provides a solid surface for mounting. These handles are for use with a long tang blade and a pommel. The price includes the pommel ref: F74 that is used to attach the handle.

Weight:

26g

Formed to fit either left or right handed fencers. The rubber is very grippy when dry but can become slippery with prolonged use. The price includes the pommel ref: F74 that is used to attach the handle.

Weight:

35g

Our durable cold formed electric guard. After testing guard designs made from a single piece of material we have found that after heavy use the guard starts to wear away where it is in contact with the tang of the blade. All our guards are reinforced at the tang with a second layer of aluminium giving them a longer life.

Weight:

52g

size:

10.5cm

Extremely durable like a standard Leon Paul Guard but about 20% of the weight.

Weight:

40g

size:

10cm

Leon Paul was the first company to use aircraft grade Aluminium alloy to produce lightweight guards. Our range of guards across all 3 weapons is renowned for being the most long lasting and safe on the market. The special aluminium allows the guard to be thinner without compromising on strength meaning they are 30% lighter than our standard guards.

Unlike other lightweight guards ours are heat tempered after forming to give them a hard yet springy quality that gives them their increased durability. After testing guard designs made from a single piece of material we have found that after heavy use the guard starts to wear away where it is in contact with the tang of the blade. All our guards are reinforced at the tang with a second layer of aluminium and our lightweight guards have copper rivets to distinguish them from our normal range.

Weight:

37g

size:

10cm

This Mini guard is smaller and lighter making it ideal for junior electric weapons.

Weight:

44g

size:

size 9.5cm

These guards contain a mix of Aluminium and Titanium and are made from a single piece of pressed metal. They are extremely durable like the standard Leon Paul Guards but save about 20% of the weight.

Weight:

41g

size:

10cm

This pad is made from a waterproof PVC layer over a foam core. Unlike the fibre pads sold by other manufacturers it will not fray, leak colour or absorb sweat. It is suitable for electric weapons as it has a crescent removed to accommodate the inside guard socket.

Weight:

10g

size:

10cm

We have taken a step back from the traditional design of a pad and come up with a new concept with several distinct advantages over a standard pad:

- Clear design means you can see immediately if any damage has occurred to the wire without moving the pad

- When mounting a weapon it is far easier to check that the wire is running through the notch in the handle ensuring you don't trap the wires and cause shorting.

The PVC used is durable, waterproof and will not split around the edges

- You can write your name on the inner surface of the guard and it will never rub off

- At international level all weapons have to be checked to ensure they have not been modified. A clear pad makes it far easier and quicker for armourers to carry out the weapons check.

Weight:

8g

size:

10cm

This new concept has several advantages over a standard pad and i a evolution of the original Pro pad:

- Made from a thicker PVC to give more cusioning than Pro pad

- Translucent design means you can see if any damage has occured to the wire without moving the pad

- When mounting a weapon it is far easier to check that the wire is running through the notch in the handle ensuring you don't trap the wires and cause shorting.

- The PVC used is durable, waterproof and will not split around the edges

- You can write your name on the inner surface of the guard and it will never rub off

- At international level all weapons have to be checked to ensure they have not been modified. A clear pad makes it far easier and quicker for armourers to carry out the weapons check.

Weight:

13g

size:

10cm

Bayonet Inside guard socket. Push and twist to lock bayonet design means perfect contact to eliminate white lights. Also it is almost impossible for it to fall out during play. (The system works like a light bulb fitting. To insert the plug you have to push it all the way into the socket and then twist to lock. To remove the plug you should push before you twist to minimise wear to the plug.)

Weight:

18g

Our lightweight Foil Socket has the following advantages:

- Low Profile design height reduced from 24mm to 17mm

- Held together by soild permanent Steel Rivet

- Extra strong internal spring

- Lowest possible resistance

- Stainless steel body

Weight:

12g

2 Pin continental style inside guard socket.

Weight:

20g

Plastic sleeving wide enough for two Foil or two Sabre blades. This will help keep sweaty clothing away from your blade and prevent possible corrosion.